:Excellent :Good :Somewhat Poor :Very Poor

 

ChemicalsMaterial
Polyvinyl chloride
(general PVC)
Polyvinyl chloride
(oil resistance PVC)
Nitrile rubberNatural rubber
(latex)
Acid Hydrochloric acid (15%)
Hydrochloric acid (36%) *
Nitric acid (10%)
Nitric acid (61%) *
Sulfuric acid (20%)
Sulfuric acid (80%) *
Chromic acid (10%)
Acetic acid (20%)
Oleic acid
Citric acid (20%)
Hydrogen peroxide (36%)
Alkali Ammonia solution (10%)
Sodium hydroxide (20%)
Sodium hydrogen carbonate (7%)
Sodium carbonate (10%)
Alcohol Methyl alcohol
Ethyl alcohol
Isopropyl alcohol
Ethylene glycol
Glycerin

Ketone

Acetone
Methyl ethyl ketone (MEK)
Methyl isobutyl ketone (MIBK)
Amide N,N-Dimethylformamide (DMF)
Ester Ethyl acetate
Bis(2-ethylhexyl)phthalate (DEHP)
Ether Diethyl ether
Tetrahydrofuran (THF)
Aldehyde Formaldehyde solution(37%)
Acetaldehyde
Hydrocarbon Benzene
Toluene
Xylene
Cyclohexane
Isooctane
Gasoline
Kerosene
Other Lacquer thinner
Paint thinner 
Machine oil
Chloroform
Trichloroethylene
Lard
Vegetable oil
Saponated cresol solution(3%)
Liquid drain cleaner
(Sodium hydroxide、Hypochlorite)

*There is a possibility of fading while in use.

NOTE
This chart shows the resistance at room temperature.                        
The chemical resistance of materials can be affected by the thickness of gloves, temperature, operating time, after treatment, and other factors.
This information should be considered as a general guide rather than an unqualified guarantee.
We recommend that a suitability test be performed prior to use.